behars Loading... Please wait...

“Stellavolta is responding to COVID-19 by continuing to support your needs. We are open for business and maintain our normal hours of operation.”

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12

MidNite Solar MNSI6048 Pre-Wired Inverter System

Brand Name:
MidNite Solar

Other Details

300.00 LBS
Ships in 15 business days or less.

Product Description

Midnite Solar Logo

MidNite Solar MNSI6048 Pre-Wired Inverter System. SMA Sunny Island Pre-Wired 6048 120 VAC Inverter for Off Grid or Battery-Based Grid Tie.

We DO NOT accept returns on Pre-Wired systems, battery cables or custom built equipment.


  • Environmental Rating-Type 1 (Indoor)
  • SMA Sunny Island Pre-Wired 6048 120 VAC Inverter for Off Grid or Battery based Grid Tie
  • 6000 Watt 48 Volt Inverter
  • AC Bypass Assembly Included
  • CLASSIC 150 charge controller with DC-GFP (Ground Fault Protection) and Arc Fault protection built in.
  • Two MNSPD300's (Surge Protection Devices)
  • 250 amp Battery Main Breaker for the Sunny Island
  • All MidNite components have a 5 year warranty. SMA Inverters and Components are covered by ETL for US & Canada
  • Listed by ETL for US & Canada
  • SMA Sunny Island Inverter made in Germany
  • Assembled, tested, and crated before shipping.
  • The Whizbang Jr current sense module for CLASSIC provides battery state of charge and is included with this product.

MidNite Solar pre-wired inverter systems offer a turn key solution to installing a battery based inverter system, saving time in the field. With a pre-wired solution all of the confusion is taken out of selecting all the right parts. This system uses the SMA Sunny Island Inverter that is rated at 6,000 and uses a 48 volt battery. It produces 120 volts AC and a single AC input. MidNite does offer an automatic transfer relay that can be installed in the E-PANEL that will allow the Sunny Island to automatically select between two AC inputs (For example the grid or generator). Don't forget to look at our other products that compliment the pre-wired inverter system like our Battery Boxes or Disconnecting Combiners. Our pre-wired systems can be configured in about any way needed with any of the common battery based inverters (except Outback). Please contact us for a quote if the System you need is not listed. Below is a simple of the major components included in the system.

Custom Variations

  • MNSI6048-CL150: Includes the CLASSIC 150
  • MNSI6048-CL200: Includes the CLASSIC 200 and high voltage input breakers
  • MNSI6048-CL250: Includes the CLASSIC 250 and high voltage input breakers
  • MNSI6048-2CL150: Includes two CLASSIC 150 charge controllers, mounting bracket, SPD300, 2 DC breakers and wiring
  • MNSI6048-2CL200: Includes two CLASSIC 200 charge controllers, mounting bracket, SPD300, 2 high voltage DC breakers and wiring.
  • MNSI6048-2CL250: Includes two CLASSIC 250 charge controllers, mounting bracket, SPD300, 2 high voltage DC breakers and wiring
  • MNSI6048-CL150-RSS: The MNSI6048-CL150-RSS is a Rapid Shut Down compliant upgrade of this model. The RSS Upgrade includes:
    • RT main DC breaker (125, 175, or 250 amp depending on E-Panel)
    • A MNBDM (to control the main breaker)
    • A MNEPV5 DC breaker to protect the wire and the MNBDM
    • Full function testing of the Rapid Shut Down.
    • NOTE: the Birdhouse, Combiners, and Cat-5 cable are sold separately.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Back to Top