Philadelphia Solar PS-MNB108(HCBF)-440W Bifacial Solar Panel 440W - Pallet of 37

Philadelphia Solar PS-MNB108(HCBF)-440W Nexus Bifacial Solar Panel Half-Cell N-Type Black-on-Black 440W
This listing is for one pallet of 37 solar panels. For odd lot quantities (less than a pallet), use the following link: Philadelphia Solar PS-MNB108(HCBF)-440W Bifacial Solar Panel 440W - Odd Lot Quantities

Half-Cut Cell Technology

Half-cut solar cells are designed to carry half the electrical current of full cells, which reduce resistance to just a quarter. The lower resistance means less energy loss, allowing half-cell modules to deliver 3% more power output compared to standard full-cell modules.

A key advantage of half-cut panels is their superior performance under shading. Traditional panels are typically divided into three cell groups, so shading just one cell can cut output by a third. In contrast, half-cell modules are split into six smaller sections. This means that if one cell is shaded, only one-sixth of the total output is affected, greatly minimizing power loss.

Thanks to this innovative layout, half-cut technology ensures higher energy yields, improved reliability, and greater efficiency, especially in partially shaded or high-temperature environments.

Bifacial Technology

Bifacial modules generate power from both the front and rear sides, making them highly efficient and adaptable. Their energy gain depends on the reflectivity of the installation surface, with rear-side contributions reaching up to 25% on highly reflective ground. This innovative design increases overall energy yield, providing a more sustainable and cost-effective solar solution.

N-Type Technology

N-Type solar cell technology represents the next generation in photovoltaic innovation, offering superior performance, stability, and longevity compared to traditional PERC (Passivated Emitter Rear Cell) technology. Unlike P-type cells, which are doped with boron, N-type cells use phosphorus as the primary dopant, which helps eliminate many of the limitations seen in previous technologies.

One of the key advantages is their higher efficiency. N-Type wafers are not susceptible to light-induced degradation (LID), a common issue in PERC cells, meaning they maintain their performance more consistently over time. Additionally, N-type cells feature lower impurity levels and better tolerance to high temperatures, which translates into improved energy yield in hot climates.

N-Type technology also provides superior bifacial performance. Because both sides of the cell can capture sunlight, N-Type bifacial modules can generate more electricity per square meter, maximizing energy production even in diffuse or reflected light conditions – a major advantage over standard PERC modules.

Low Power Temperature Coefficient

Philadelphia Solar’s bifacial panels feature an industry-leading temperature coefficient of –0.29% C, ensuring excellent performance and energy yield even in high-temperature environments. A smart choice for hot climates.

Multi Busbar Cells

Philadelphia Solar panels feature a 16-busbar design with shorter current paths, minimizing power loss caused by micro-cracks and broken fingers. This structure ensures better current distribution across the cell, boosting reliability and maintaining stable output over time.

The panels also use circular ribbon technology, which reduces shading on the cell surface and improves light capture by reflecting more sunlight into the active area.

Together, these designs enhancements improve overall modules efficiency while delivering a durable and cost-effective solar solution.

Durability

Philadelphia’s bifacial panels are built to endure harsh weather and heavy loads. Tested to withstand 5400 Pa from the front, 2400 Pa from the back, and dynamic loads up to 1000 Pa, our modules deliver reliable performance in even the toughest environments. Residential panels achieve 5400 Pa rear load – proving they’re made to last.

Quality You Can Rely On

At Philadelphia Solar, we are committed to delivering the highest standards of quality in every panel we produce. To uphold this commitment, our modules undergo rigorous electroluminescence (EL) inspections using advanced, state-of-the-art equipment – ensuring early detection of micro-defects and consistent, reliable performance.

Our dedicated quality team maintains strict oversight across ever stage of production, and our products are backed by a wide range of internationally recognized certifications. These credentials reinforce the trust, efficiency, and long-term value our panels offer – making them a dependable choice for any solar energy project.

Reliable Protection

Philadelphia Solar panels come with two layers of protection to ensure long-term confidence and performance. Each module includes a product warranty of 12 years,and 25 years for residential systems. In addition, all panels are covered by a linear power output warranty of up to 30 years, guaranteeing consistent energy production over time. Warranty documents are available in both English and Arabic for ease and transparency.

Attachments

• Philadelphia Solar PS-MNB108(HCBF)-440W Datasheet