Blog
How do I connect the Cotek CT Series programming board?
Posted by Dillon Hayes, Cotek on Feb 3rd 2020
Click this instructional VIDEO to learn how to connect the Cotek CT Series programming board. There are also some helpful PDF documents below.
Attachments
Cotek Communication Protocol User's Ma
Can I use electricity generated from solar panels in the event of a power outage?
No, you cannot use your solar panels when the power goes down, however, you do have two solar power system options to protect yourself in the event of a power outage. 1) A battery backup system using
Read More »
Will the SMA Sunny Boys support wind turbine power?
No, the new -41 models do not support wind turbine systems.
Read More »
Will the Fronius Primo inverters work off-grid?
No, these are grid-tie inverters, however, you can make it work if you couple a Fronius Primo inverter to an off-grid inverter.
Read More »
Is the battery indicator always on, on the MPOWERD Luci Solar String Lights and Mobile Charger?
The battery indicator is on when you press the battery indicator button. Once you press it again, it will turn off the battery indicator.
Read More »
Are Primus Wind Power wind turbines compatible with lithium batteries?
Yes, the Primus Wind Power wind turbines are compatible with lithium batteries. Click the link below to learn more.
Primus Wind Power Lithium Battery Integration
Read More »
What are the part numbers for the new SolarEdge screenless inverters with SetApp?
SolarEdge SetApp Enabled PN Equivalency List
Read More »
MidNite Solar Remote Trip Circuit Breakers
MidNite Solar's Remote Trip (RT) circuit breakers require a voltage pulse of approximately 1/10th of a second. Much longer than that time and the coil will burn out. In other words, you can apply cont
Read More »
Can the OutBack Power MATE, MATE2, MATE_B, or MATE3s connect directly to the FM60 or FM80?
Yes, OutBack Power MATE devices can be connected directly to any of OutBack Power's inverters or charge controllers?
Read More »
Can I use the SMA SB7.7-1 SP-US-41 Sunny Boy Solar Inverter on a 9.8 kW system?
Yes, you could if you had two inverters in parallel. You can also oversize the Sunny Boy 1.5 times on the DC side (when correctly following the installation manual), meaning that you could have up to
Read More »