Blog

Before connecting the battery, measure the battery voltage. It must be over 7 volts to power the controller. For 24 volt systems, the battery voltage must be greater than 15.5 volts to properly detect

There are two things to consider: Solar Array Wattage Solar Array Voltage To determine the Solar Array Wattage, simply multiple each solar panel's watts by the number of solar panels you have.

Click here to open the PDF titled "How To AC Couple Grid Tied Inverters with OutBack Frequency Shifting Inverters."

Yes, the Morningstar EMC-1 will work with all TriStar and TriStar MPPT solar controllers regardless of their age.

Select custom battery type for lithium batteries. You'll then see a separate submenu where you can custom program the inverter per the manufacturer's battery specifications. You don't need the the

Yes, having other charge sources (including other manufacturer's charge controllers) in parallel with Morningstar TriStar may work. You will want to match all of the charge settings as close as possi

Yes, the Enphase IQ7PLUS-72-2-US will work without the Envoy, however, you will not be able to: Monitor your system Receive support from Enphase support agents to remotely check system health All

Yes, you may be able to use a MidNite Solar Combiner Box in a wind application depending on the wind turbine's manufacturer's specifications. In other words, if you are pairing a wind turbine with

Yes, you will still need a charge controller to regulate voltage going to the batteries. Let's say for example, you have an OutBack Power Radian GS8048A-01 that is grid-tied. An inverter takes DC p