Description
MidNite Solar MNSHUNT 50mV/500Amp.
The shunts are calibrated with an accuracy of +/- 0.25%. 50mV/500amp includes Taptite mounting screws. Has two 8-32 tapped holes on one end to attach a bus bar. This is the industry standard shunt. The shunt may be manufactured by another manufacturer, however, still supplied by MidNite Solar to their specifications.
Weight: 2 lbs
Attachments
MidNite Solar
MidNite Solar MNSHUNT-1000/50 Deltec Shunt 1000A 50mV This is the 1000 amp 50 mV shunt. It is larger in size than the 500 amp shunt, so items like the WhizBang Jr will not directly fit this shunt...
MidNite Solar
MidNite Solar MNSHUNT BUSBAR. MNSHUNT and hardware not included. Environmental Rating - Type 1 (Indoor) Warranty
MidNite Solar
MidNite Solar MNSHUNT-1000/100 Deltec Shunt 1000A 50mV This is the 1000 amp 100 mV shunt. It is larger in size than the 500 amp shunt, so items like the WhizBang Jr will not directly fit this shunt...
MidNite Solar
MidNite Solar MNBACKPLATE Backplate 16 gauge gray steel accepts one or two EPanels, (wide or narrow). Wires route behind the 2" thick plate for a clean installation. Rear cover plates enclose wires...
MidNite Solar
MidNite Solar MNWRENCH Wrench. A 1/2 and 3/4 inch wrench used on MidNite's E-Panels where 1/2 inch strain reliefs and MNADAPTER 1/2-3/4 adapters are used. Great tool to get into tight places.
