Circuit Breakers

MidNite Solar MNEAC30 Circuit Breaker 30A 120VAC. All MidNite Solar circuit breakers are rated for 100% continuous duty at the rated current when mounted in a MidNite Solar enclosure. MidNite Solar's breakers are rated to break the full rated load at...

MidNite Solar MNEAC5 Circuit Breaker 5A 120VAC. All MidNite Solar circuit breakers are rated for 100% continuous duty at the rated current when mounted in a MidNite Solar enclosure. MidNite Solar's breakers are rated to break the full rated load at the...

MidNite Solar MNEDC250RT Remote Trip Circuit Breaker 250A 125VDC, Quantity 1 MidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. Remote Trip...

MidNite Solar MNEDC175RT Remote Trip Circuit Breaker 175A 125VDC. MidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. Remote Trip breaker for...

MidNite Solar MNSW-SLIDER-30 AC Bypass. The AC Bypass kit for the single SW E-Panel consists of the three 2pole AC breakers, one 50 amp for the bypass and two 30 amp for the AC in and AC Out as well as the Slider and hardware. This kit allows you to...

MidNite Solar MNEDC Circuit Breakers 150VDC Features Non-Polarized Listed for 120 VAC and 150 VDC Breaker Torque Value: 30 In-Lbs (3.4NM) Environmental Rating - Type 1 (Indoor) Listed for US & Canada 3/4" wide, 1/4" studs for Electrical...

MidNite Solar MNEPV16-600RT 16A 4-Pole Circuit Breaker MidNite’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. All MidNite circuit breakers can be...

Outback Power PNL-GFDI-80Q PV Ground Fault Detector 80 Amp 150VDC Four Pole, Panel Mount. Ground fault detection and interruption is required by the NEC as a safety precaution. The OutBack PV Ground-Fault Detection and Interruption System protects...

Outback Power PNL-GFDI-80D PV Ground Fault Detector 80 Amp 150VDC Dual Pole, Panel Mount. Ground fault detection and interruption is required by the NEC as a safety precaution. The OutBack PV Ground-Fault Detection and Interruption System protects...

Outback Power PNL-GFDI-80 PV Ground Fault Detector Interrupter 80 Amp 150VDC Single Pole, Panel Mount. Ground fault detection and interruption is required by the NEC as a safety precaution. The OutBack PV Ground-Fault Detection and Interruption System...

OutBack Power DIN-60-DC PV Array Circuit Breaker 60 Amp 125VDC DIN rail mount with set-screw compression terminals. Mount 0.5" (13 mm) wide - #14 to 2 AWG (1.62 mm to 6.54 mm diameter) clamp terminals. OutBack offers a full line of integration hardware...

OutBack Power DIN-9-DC PV Array Circuit Breaker 9 Amp 150VDC DIN rail mount with set-screw compression terminals. Mount 0.5" (13 mm) wide - #14 to 2 AWG (1.62 mm to 6.54 mm diameter) clamp terminals. OutBack offers a full line of integration hardware...

OutBack Power PNL-80-DC Panel Mount Circuit Breaker 80 Amp Single Pole with stud terminals on the back. Ring terminals required. OutBack offers a full line of integration hardware designed to complement our power electronics products, reduce the time...

OutBack Power PNL-60-AC/DC Front Panel Mount Circuit Breaker 60 Amp Single Pole with stud terminals on the back. Ring terminals required. OutBack offers a full line of integration hardware designed to complement our power electronics products, reduce...

OutBack Power PNL-50-AC/DC Front Panel Mount Circuit Breaker 50 Amp Single Pole with stud terminals on the back. Ring terminals required. OutBack offers a full line of integration hardware designed to complement our power electronics products, reduce...

OutBack Power PNL-40-AC/DC Front Panel Mount Circuit Breaker 40 Amp Single Pole with stud terminals on the back. Ring terminals required. OutBack offers a full line of integration hardware designed to complement our power electronics products, reduce...