Description
Pytes HV48100 12S Battery Cabinet Indoor 12-Slot IP20
The Pytes HV48100 12S is the tall, narrow member of the HV48100 cabinet family. It holds twelve HV48100 battery modules plus the battery control unit in a footprint just 23.43 inches wide, which makes it the right choice when floor space is tight and ceiling height is not.
Capacity
- 1P12S — 12 HV48100 BMU with one BCU for 61.44kWh at 570–691.2Vdc
- Also accepts up to 13 Pytes V5 or V5α modules for 66.56kWh; Pytes requires the side panels to be removed in that case for heat dissipation
Cabinet Specifications
- 23.43 × 26.77 × 82.68 inch (595 × 680 × 2100 mm)
- 304.2 lbs (138 kg) empty
- IP20 enclosure rating for indoor installation
- 13 module positions for BMU and BCU
Check your access route before ordering. At 82.68 inches tall this cabinet will not pass upright through a standard 80-inch doorway, and it needs clear ceiling height plus tilt room to stand.
HV48100 Battery Module (BMU)
- 5.12kWh nominal energy, 51.2V nominal, 100Ah
- Operating range 47.5–57.6V
- Lithium iron phosphate (LFP) chemistry
- 50Adc continuous charge and discharge current
- CAN and RS485 communication
- 19.06 × 20.87 × 5.51 inch (484 × 530 × 140 mm), 94.8 lbs (43 kg)
HV48100 Battery Control Unit (BCU)
- 200–870V controller working voltage
- 7.56W self-consumption
- 19.06 × 20.09 × 5.51 inch (484 × 510 × 140 mm), 29.32 lbs (13.3 kg)
System Performance
- Nominal system voltage 256–768V depending on module count
- 25.6kWh to 76.8kWh of nominal system energy from 5 to 15 modules across the platform
- 100Ah nominal system capacity, 50Adc continuous charge and discharge
- 90% recommended depth of discharge
- Over 6,000 cycles
- CAN, RS485, dry contact and WiFi communication
Installation Environment
- Charging temperature 32°F to 113°F (0°C to 45°C)
- Discharging temperature 14°F to 122°F (-10°C to 50°C)
- Operating humidity 5% to 80%, non-condensing
- Altitude below 13,123 ft (4,000 m)
- IP20, indoor installation only
Plan for floor loading. A fully populated 1P12S build weighs roughly 1,471 lbs, cabinet included.
Inverter Compatibility
The HV48100 platform is field integrated with Sol-Ark, Solis and Sinexcel inverters. For 12S1P builds Pytes specifies the Sol-Ark 60K-3P-480V and the Solis S6-EH3P30K03-LV-YD-H-US, S6-EH3P30K-NV-YD-H-US, S6-EH3P50K-NV-YD-H-US and S6-EH3P60K-NV-YD-H-US. Published bundles run from 30kW / 60kWh on a single cabinet up to 60kW / 180kWh on three. A single inverter supports up to six cabinets for 360kWh, and every inverter in a parallel group must carry the same number of cabinets. Builds with more than two cabinets per inverter also require the HV C01 Combiner Box, the HUB OD communication hub, and one dry contact connector per BCU.
Certifications
- UL 9540 Ed.3 (2023), UL 9540A and UL 1973
- CEC and SGIP listed
Attachments
