Description
Pytes HV48100 15S Battery Cabinet Indoor 15-Slot IP20
Commercial and industrial storage projects rarely land on a single size. The Pytes HV48100 15S is the widest cabinet in the HV48100 family, built to hold up to fifteen HV48100 battery modules plus the battery control unit in a low, wide footprint that fits under standard ceiling heights where the taller 12S cabinet will not.
Two Supported Configurations
- 1P15S — 15 HV48100 BMU with one BCU for 76.8kWh at 712.5–864Vdc
- 2P7S — 14 HV48100 BMU with two BCU for 71.68kWh at 332.5–403.2Vdc, the configuration Pytes specifies for its 30kW C&I bundles
- Also accepts up to 16 Pytes V5 or V5α modules for 81.92kWh; Pytes requires the side panels to be removed in that case for heat dissipation
Cabinet Specifications
- 41.5 × 24.7 × 57.6 inch (1054 × 626 × 1463 mm)
- 278.9 lbs (126.5 kg) empty
- IP20 enclosure rating for indoor installation
- 16 module positions for BMU and BCU
HV48100 Battery Module (BMU)
- 5.12kWh nominal energy, 51.2V nominal, 100Ah
- Operating range 47.5–57.6V
- Lithium iron phosphate (LFP) chemistry
- 50Adc continuous charge and discharge current
- CAN and RS485 communication
- 19.06 × 20.87 × 5.51 inch (484 × 530 × 140 mm), 94.8 lbs (43 kg)
HV48100 Battery Control Unit (BCU)
- 200–870V controller working voltage
- 7.56W self-consumption
- 19.06 × 20.09 × 5.51 inch (484 × 510 × 140 mm), 29.32 lbs (13.3 kg)
System Performance
- Nominal system voltage 256–768V depending on module count
- 25.6kWh to 76.8kWh of nominal system energy from 5 to 15 modules
- 100Ah nominal system capacity, 50Adc continuous charge and discharge
- 90% recommended depth of discharge
- Over 6,000 cycles
- CAN, RS485, dry contact and WiFi communication
Installation Environment
- Charging temperature 32°F to 113°F (0°C to 45°C)
- Discharging temperature 14°F to 122°F (-10°C to 50°C)
- Operating humidity 5% to 80%, non-condensing
- Altitude below 13,123 ft (4,000 m)
- IP20, indoor installation only
Plan for floor loading. A fully populated 1P15S build weighs roughly 1,730 lbs and a 2P7S build roughly 1,665 lbs, cabinet included.
Inverter Compatibility
The HV48100 platform is field integrated with Sol-Ark, Solis and Sinexcel inverters. For 15S builds Pytes specifies the Sol-Ark 30K-3P-208V and the Solis S6-EH3P30K03-LV-YD-H-US and S6-EH3P30K-NV-YD-H-US, in 2P7S configuration, giving 30kW / 70kWh on one cabinet or 30kW / 140kWh on two. A single inverter supports up to three cabinets for 210kWh, and every inverter in a parallel group must carry the same number of cabinets. Builds using more than one cabinet per inverter also require the HV C01 Combiner Box, the HUB OD communication hub, and one dry contact connector per BCU.
Certifications
- UL 9540 Ed.3 (2023), UL 9540A and UL 1973
- CEC and SGIP listed
Attachments
