MidNite Solar MNDC-GFP100RT-2P Circuit Breaker 100A 150VDC

MidNite Solar MNDC-GFP100RT-2P Ground Fault Circuit Breaker 100 Amp 150VDC 2-Pole Panel Mount Dual DC Ground Fault Protector. NRTL listed breaker assembly.

This breaker has several possible uses:

• Environmental Rating - Type 1 (Indoor)
• 1 pv array breaking pv - and + using the 1 amp pole as the trip source
• 1 pv array breaking pv - and + using the classic to shunt trip the device
• 2 pv arrays breaking just the + using the 1 amp pole as a trip source
• 2 pv arrays breaking just the + using the classic to shunt trip the device
• 2 pole AC or DC disconnect that will interact with our Rapid Shutdown System using our battery disconnect module

All MidNite circuit breakers hold 100% rated current independent of ambient temperature. All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure.

• Breaker Torque Value: 30 In-Lbs (3.4NM)
• Environmental Rating - Type 1 (Indoor)
• Listed for US & Canada

FAQs

• Does the GFP breaker need to match my string voltage the same as a DC breaker?
  Yes, the GFP breaker must match the string voltage the same as a DC breaker, however, the GFP breaker is not allowed as a disconnect and will not provide overcurrent protection.
• Can I have two breakers on the same circuit, such as a DC breaker and a GFP breaker?
  Yes, you can have two breakers on the same circuit. The DC breaker can act as a disconnect and will provide overcurrent protection, whereas the GFP breaker will provide ground-fault protection.

Attachments

• MidNite Solar MNDC-GFP100-Dual Manual
• MidNite Solar MNDC-GFP100 Specifications
• MidNite Solar C-Series Breaker Specifications