Blog

Yes, all Cotek products will work with sealed lead acid and lithium batteries as long as the batteries fall within the DC input voltage range.

WARNING: For Tigo optimizers, always connect the Solar Panel (PV module) cables to the optimizer first if there is any sunlight, before connecting the optimizer to the string. If done in reverse order

Yes, the use of the SunSaver load circuit is 100% optional. The controller will still function to regulate the solar charging of the batteries. The 3-step connection procedure outlined in the opera

BNC4: Includes Revenue Grade Meter BNI4: Includes Revenue Grade Production and Consumption Meter BNU4: Does not include Meter

No, because it may destroy the MNEAC circuit breaker. Instead, use MidNite Solar's MNEPV DC circuit breakers on the DC side which would be between: The solar array and the charge controller (the am

“R” indicates that the FXR was designed for renewable applications. Off-grid and grid-interactive functions are integrated in the same inverter. Vented models are preceded with “V”, as in “VFXR3648A

Visit Morningstar Best Practices By Battery Chemistry webpage. Visit Morningstar Custom Settings Information webpage.

The Nominal Battery Voltage is the named voltage or the voltage printed on the battery. The Battery Voltage Range or Rated Voltage of your charge controller should be higher than the nominal voltage o

No, the other solar panels will continue to operate normally, if one or more solar panels fail. In addition, upon installation if you do not use all four channels in the QS1, then it is advisable tha