Description
Pytes Energy HV48100 SE Outdoor ESS Cabinet Bundle 70kWh
Outdoor commercial storage has to survive weather, satisfy the fire marshal, and still be serviceable years later. The Pytes HV48100 SE answers all three in one enclosure: an IP55 outdoor cabinet with a four-level active fire suppression system, integrated HVAC, and battery modules already installed and commissioned as a unit.
Shipped as a Complete System
Unlike the indoor HV48100 cabinets, the HV48100 SE arrives with the battery modules (BMU) and the battery control unit (BCU) installed. Choose the internal configuration at order and the cabinet is built to match.
Four-Level Active Fire Suppression
- Level 1 — Detection and ventilation: hazardous gas detection triggers the ventilation system
- Level 2 — Aerosol suppression: heat and smoke detection triggers the aerosol suppression system
- Level 3 — Pressure relief: the explosion relief valve opens automatically if internal pressure exceeds safe limits
- Level 4 — Fire hose port: a dedicated connection point for firefighter hose attachment
Built for Outdoor Duty
- IP55 enclosure with C4-M anti-corrosion grade for coastal and industrial sites
- Operating temperature -4°F to 131°F (-20°C to 55°C)
- Relative humidity 5% to 80%, non-condensing
- Operating altitude up to 9,843 ft (3,000 m)
- 43 × 47 × 79 inch (1100 × 1193 × 2015 mm)
Integrated Thermal Management
- HVAC with 2,300W maximum cooling capacity (L35) and 1,050W maximum heating capacity, IP55 rated
- Battery module internal heating film: 176W at 110Vac / 60Hz, engaging at or below 50°F (10°C) and disengaging at or above 59°F (15°C)
Battery Module
- Lithium iron phosphate (LFP) chemistry
- 5.12kWh nominal energy, 51.2V nominal, 100Ah
- Operating voltage 47.5–57.6V
- 99 lbs (45 kg) per module
- 6,000 cycles at 77°F / 25°C, 0.5C and 90% DOD, to 70% end of life
Communication
CAN, RS485, RS232, dry contact and WiFi.
Inverter Pairing
Pytes specifies the Sol-Ark 30K-3P-208V and the Solis S6-EH3P30K03-LV-YD-H-US and S6-EH3P30K-NV-YD-H-US for 7S2P builds, the Sol-Ark 60K-3P-480V for 12S1P, and the Solis S6-EH3P50K-NV-YD-H-US and S6-EH3P60K-NV-YD-H-US for 14S1P. Cabinet limits per inverter are three cabinets (210kWh) for 7S2P and six cabinets for 12S1P (360kWh) and 14S1P (420kWh). Every inverter in a parallel group must carry the same number of cabinets. The HV C01 Combiner Box is required once an inverter runs more than one 7S2P cabinet or more than two 12S1P or 14S1P cabinets.
Compliance
- Certified to UL 9540 Ed.3 (2023), UL 9540A, UL 1973 and UN 38.3
- Code compliant with NFPA 68, NFPA 69 and NFPA 855
- Listed for CEC, SGIP and OGPe
Warranty
- 3 years on the cabinet system, excluding the BMU and BCU, with an optional 2-year extension available for purchase
- 10 years or 6,000 cycles on the battery modules, whichever comes first
What's Included
- HV48100 SE Outdoor Battery Cabinet UL9540 IP55
- (2) HV48100 SE Battery Control Unit (BCU)
- (14) HV48100 SE Battery Module Unit (BMU) 5.12 kWh / 51.2V / 100Ah
Attachments
