Blog

You will need 2 separate clippers. In fact you will always need 1 clipper per wind turbine. You cannot have comingled input into 1 clipper. This is because each MidNite Solar CLASSIC Charge Control

They are about 40 dB and are more quiet than Air 40 blades which produce a maximum of 65 dB.

Yes, having other charge sources (including other manufacturer's charge controllers) in parallel with Morningstar TriStar may work. You will want to match all of the charge settings as close as possi

Yes. All Primus Wind Power wind turbines use slip rings.

The "Startup Wind Speed" is 7 mph. At this cut in wind speed it will be a trickle charge.

The SI-300 is not a wind or solar inverter like a pure grid-tie inverter might be. The SI-300 simply inverts 12 VDC to 120 VAC. The charging source for the 12-volt battery bank could be wind, solar, h

No. All Primus Wind Power AIR wind turbines do not require a charge controller.

No, all of the Primus Wind Power wind turbines are for off-grid applications.

The clipper as the name implies clips the voltage and protects the charge controller. It also serves as the dump load, but instead of bleeding power off of the battery or battery bank, it prevents ene